Brocade Encryption Switch QuickStart Guide (Supporting Fab Bedienungsanleitung Seite 1

53-1001118-0118 August 2008 53-1001118-01*53-1001118-01*18 August 2008Brocade Encryption SwitchQuickStart GuideSupporting Fabric OS v6.1.1_enc

10 of 20 Encryption Switch QuickStart Guide53-1001118-01Items included with the switchThe following items are included with the standard shipment of t

Encryption Switch QuickStart Guide 11 of 2053-1001118-01Configuring the switchTo configure the switch, perform the following tasks. Figure 6 illustrat

12 of 20 Encryption Switch QuickStart Guide53-1001118-01FIGURE 6 Switch configuration

Encryption Switch QuickStart Guide 13 of 2053-1001118-01Connecting a serial cable between switch and hostFollow these steps to connect a serial cable.

14 of 20 Encryption Switch QuickStart Guide53-1001118-01Setting the IP addressConfigure the switch with a static IP address.Setting a static IP addres

Encryption Switch QuickStart Guide 15 of 2053-1001118-01Setting the domain IDTo set the switch domain ID, follow these steps.1. Log on to the switch b

16 of 20 Encryption Switch QuickStart Guide53-1001118-01switch:admin> dateFri Sep 26 17:01:48 UTC 2008switch:admin> date "0926123008"F

Encryption Switch QuickStart Guide 17 of 2053-1001118-01switch:admin> tsclockserverLOCLswitch:admin> tsclockserver "132.163.135.131" s

18 of 20 Encryption Switch QuickStart Guide53-1001118-01NOTEEach SFP has a 10-pad gold-plated PCB-edge connector on the bottom. The correct position t

Encryption Switch QuickStart Guide 19 of 2053-1001118-01Managing cablesATTENTIONThe minimum bend radius for a 50 micron cable is 2 in. under full tens

2 of 20 Encryption Switch QuickStart Guide53-1001118-01Copyright © 2008 Brocade Communications Systems, Inc. All Rights Reserved.Brocade, the Brocade

20 of 20 Encryption Switch QuickStart Guide53-1001118-01After completing the pre-initialization tasks, you may need to perform several tasks related t

Encryption Switch QuickStart Guide 3 of 2053-1001118-01OverviewThis QuickStart guide is intended as an overview to help experienced installers unpack,

4 of 20 Encryption Switch QuickStart Guide53-1001118-01Port side of the switchThe port side of the switch (Figure 1) includes the switch power and sta

Encryption Switch QuickStart Guide 5 of 2053-1001118-01Port NumberingThe Fibre Channel ports on the switch are numbered from 0 to 31 (Figure 2).FIGURE

6 of 20 Encryption Switch QuickStart Guide53-1001118-01Field-replaceable units (FRUs)The switch has two power supply (Figure 4) and three fan assembly

Encryption Switch QuickStart Guide 7 of 2053-1001118-01FIGURE 5 Fan assembly1Captive screw2 Fan status LED

8 of 20 Encryption Switch QuickStart Guide53-1001118-01Time and items requiredYou can set up and install the Brocade Encryption Switch in the followin

Encryption Switch QuickStart Guide 9 of 2053-1001118-01Site preparation and installation guidelinesThe following steps are required to ensure correct