
Brocade vendor-specific attributes for RADIUS (Continued)TABLE 6
Attribute name Attribute ID Data type Description
foundry-command-
exception-flag
3 integer Specifies whether the commands indicated by the foundry-
command-string attribute are permitted or denied to the user.
This attribute can be set to one of the following:
• 0 - Permit execution of the commands indicated by foundry-
command-string, deny all other commands.
• 1 - Deny execution of the commands indicated by foundry-
command-string, permit all other commands.
foundry-access-list 5 string Specifies the access control list to be used for RADIUS
authorization. Enter the access control list in the following
format.
type=string, value="ipacl.[e|s].[in|out] = [ acl-name | acl-number ]
separator macfilter.in = [ acl-name | acl-number ]
Where:
• separator can be a space, newline, semicolon, comma, or
null characater
• ipacl.e is an extended ACL; ipacl.s is a standard ACL.
foundry-MAC-
authent-needs-802x
6 integer Specifies whether or not 802.1x authentication is required and
enabled.
0 - Disabled
1 - Enabled
foundry-802.1x-valid-
lookup
7 integer Specifies if 802.1x lookup is enabled:
0 - Disabled
1 - Enabled
foundry-MAC-based-
VLAN-QOS
8 integer Specifies the priority for MAC-based VLAN QOS:
0 - qos_priority_0
1 - qos_priority_1
2 - qos_priority_2
3 - qos_priority_3
4 - qos_priority_4
5 - qos_priority_5
6 - qos_priority_6
7 - qos_priority_7
Enabling SNMP to configure RADIUS
To enable SNMP access to RADIUS MIB objects on the device, enter a command such as the
following.
device(config)#enable snmp config-radius
Syntax: [no] enable snmp [ config-radius |config-tacacs ]
Enabling SNMP to configure RADIUS
FastIron Ethernet Switch Security Configuration Guide 63
53-1003088-03
Kommentare zu diesen Handbüchern