Brocade Multi-Service IronWare Software Defined Networking Bedienungsanleitung PDF herunterladen (Seite 25)

Multi-Service IronWare SDN Configuration Guide 15

53-1003034-02

Hybrid switch and OpenFlow hybrid port mode

Brocade(config-mpls-vpls-v8-vlan-100)#tag e 2/8

Brocade(config-mpls)#int e 2/8

Brocade(config-if-e10000-2/8)#openflow protected-vlans 100

Brocade(config-if-e10000-2/8)#openflow enable layer2 hybrid-mode

Since this protected VLAN has become part of VPLS VLAN on this port, VPLS switching on this

protected VLAN will be supported.

Deleting VPLS instances from protected VLAN

To remove VPLS instance for protected VLAN from OpenFlow hybrid mode port, use this sequence

of commands.

Brocade(config)#

Brocade(config)#router mpls

Brocade(config-mpls)#

Brocade(config-mpls)#vpls v1 100

Brocade(config-mpls)#vpls-peer 17.17.17.17

Brocade(config-mpls-vpls-v1)#vlan 100

Brocade(config-mpls-vpls-v8-vlan-100)#tag e 2/8

Brocade(config-mpls)#int e 2/8

Brocade(config-if-e10000-2/8)#openflow protected-vlans 100

Brocade(config-if-e10000-2/8)#openflow enable layer2 hybrid-mode

Brocade(config)#

Brocade(config)#router mpls

Brocade(config)#vpls v1 100

Brocade(config)#vlan 100

Brocade(config)#no tag e 2/8

Now this port is not a part of VPLS instance. The protected vlan will become unconfigured protected

vlan. It will drop.

NOTE

When removing protected VLAN configuration, do not exceed the system-max unprotected VLAN

number. The command will be rejected and you will get an error message.

After removing the protected VLAN configuration, this VPLS VLAN will become configured as an

unprotected VLAN. Now, It will do VPLS switching in absence of matching flow.

Deleting VPLS instances from unprotected VLAN

To remove OpenFlow hybrid mode from a port with unconfigured protected VLAN and a VPLS

instance, execute the following commands.

Brocade(config)#

Brocade(config)#router mpls

Brocade(config-mpls)#

Brocade(config-mpls)#vpls v1 100

Brocade(config-mpls)#vpls-peer 17.17.17.17

Brocade(config-mpls-vpls-v1)#vlan 100

Brocade(config-mpls-vpls-v8-vlan-100)#tag e 2/8

Brocade(config-mpls)#int e 2/8

Brocade(config-if-e10000-2/8)#openflow protected-vlans 100

Brocade(config-if-e10000-2/8)#openflow enable layer2 hybrid-mode

Brocade(config)#

Brocade(config)#router mpls

Brocade(config)#vpls v1 100

Brocade(config)#vlan 100

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Brocade Multi-Service IronWare Software Defined Networking Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Brocade Multi-Service IronWare Software Defined Networking