Brocade Network Advisor SAN + IP User Manual v12.1.0 Bedienungsanleitung PDF herunterladen (Seite 201)

134 Brocade Network Advisor SAN + IP User Manual

53-1002949-01

Host discovery

FIGURE 51 Add Host Adapters dialog box

3. Enter a discovery request name (such as, MyFabric) in the Discovery Request Name field.

4. Click Import.

The Open dialog box displays.

5. Browse to the CSV file location.

The CSV file must meet the following requirements:

• Comma separated IP address or host names

• No commas within the values

• No escaping supported

For example, XX.XX.XXX.XXX, XX.XX.X.XXX, computername.company.com

6. Click Open.

The CSV file is imported to the Add Host Adapters dialog box. During import, duplicate values

are automatically dropped. When import is complete, the imported values display in the Host

List. If the file cannot be imported, an error displays.

7. Verify the imported values in the Host List.

8. Configure Host credentials by choosing one of the following options:

• To configure HCM agent credentials, select the HCM agent option. Go to step 10.

• To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with

step .

If you do not need to configure Host credentials, skip to step 13.

9. Configure discovery authentication by choosing one of the following options:

• To configure discovery with authentication, select the HTTPS from the Protocol list.

• To configure discovery without authentication, select the HTTP from the Protocol list.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 237 238

Keine Kommentare

Brocade Network Advisor SAN + IP User Manual v12.1.0 Bedienungsanleitung Seite 201