Brocade Network Advisor SAN User Manual v12.1.0 Bedienungsanleitung Seite 137
- Seite / 169
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Brocade Network Advisor SAN User Manual 87
53-1002948-01
SAN Ethernet loss events
5
SAN Ethernet loss events
An Ethernet event occurs when the Ethernet link between the Management Server and the
managed SAN device is lost. You can configure the application to enable events when the Ethernet
connection is lost.
Enabling SAN Ethernet loss events
The Options dialog box enables you to configure the Management application to generate an
Ethernet event after a device is offline for a specific period of time.
To enable Ethernet loss events, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
FIGURE 24 Options dialog box (SAN Ethernet Loss Event pane)
2. Select SAN Ethernet Loss Events in the Category list.
3. Select the Enable events for ethernet loss check box.
4. Enter the Ethernet time out value (10 to 120 minutes).
5. Click Apply or OK to save your work.
Disabling SAN Ethernet loss events
To disable Ethernet loss events, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select SAN Ethernet Loss Events in the Category list.
3. Clear the Enable events for ethernet loss check box.
4. Click Apply or OK to save your work.
- Brocade Network Advisor 1
- Document History 2
- Contents 3
- Chapter 2 Licenses 4
- Chapter 3 Patches 4
- Chapter 4 Discovery 4
- Chapter 8 View Management 9
- Chapter 9 Call Home 10
- Chapter 10 Third-party tools 11
- Chapter 13 Host Port Mapping 14
- Chapter 15 Host Management 15
- Chapter 19 Virtual Fabrics 18
- Chapter 21 Zoning 22
- Chapter 23 Fabric Binding 26
- Chapter 24 Port Fencing 26
- Chapter 25 FICON Environments 27
- Chapter 26 VLAN Management 27
- Chapter 27 Deployment Manager 28
- Chapter 29 Performance Data 28
- Chapter 30 Flow Vision 30
- Chapter 31 Frame Monitor 30
- Chapter 32 Policy Monitor 31
- Chapter 33 Fault Management 31
- Chapter 35 Technical Support 34
- Chapter 36 Reports 34
- Appendix A Application menus 35
- Appendix C Event Categories 35
- Appendix D User Privileges 35
- Appendix E Device Properties 35
- Chapter G Troubleshooting 36
- Appendix H Database Fields 36
- About This Document 39
- What’s new in this document 44
- Document conventions 45
- Notes, cautions, and warnings 46
- Key terms 46
- Notice to the reader 47
- Additional information 47
- Getting technical help 48
- Document feedback 49
- Getting Started 51
- FIGURE 1 Main window 52
- Management server and client 53
- Launching a remote client 54
- Viewing active sessions 59
- Disconnecting users 60
- Viewing server properties 60
- Viewing port status 61
- Server and client ports 62
- Keyboard shortcuts 66
- Look and feel customization 67
- Changing the font size 68
- PostgreSQL database 69
- > ./edb_psqlodbc.bin 71
- Feature Fabric OS 77
- Licenses 79
- Entering the license key 80
- TABLE 9 SAN upgrade paths 82
- TABLE 10 IP upgrade paths 82
- License downgrade 83
- Installing a patch 85
- Uninstalling a patch 86
- Discovery 89
- FCS policy and seed switches 90
- Discovering fabrics 91
- Attribute Value 93
- Configuring SNMP credentials 96
- Rediscovering a fabric 98
- Deleting a fabric 99
- • New Discovery Pending 100
- • “Deleting a fabric” 101
- Problem Resolution 102
- SAN Fabric monitoring 103
- SAN Seed switch 107
- Seed switch requirements 108
- Seed switch failover 108
- Changing the seed switch 108
- Host discovery 109
- Importing Hosts from a Fabric 113
- Icon Description 118
- VM Manager discovery 119
- Editing a VM manager 121
- • Active 123
- • Failed – Not reachable 123
- • Discovery pending 124
- • Excluded 124
- Application Configuration 125
- Server Data backup 127
- Configuring backup 128
- Enabling backup 130
- Disabling backup 130
- Viewing the backup status 131
- Changing the backup interval 131
- Starting immediate backup 132
- Reviewing backup events 132
- Server Data restore 133
- SAN display settings 134
- Resetting your display 135
- SAN End node display 136
- SAN Ethernet loss events 137
- Event storage settings 138
- Flyover settings 139
- Name settings 142
- Setting names to be unique 143
- Fixing duplicate names 143
- Viewing names 145
- \root (Linux) 146
- Adding a name to a new device 147
- Removing a name from a device 147
- Editing names 148
- Exporting names 148
- Importing Names 148
- TABLE 20 149
- Searching for a device by WWN 150
- Configuring the server name 150
- Configuring login security 152
- Disabling the login banner 152
- Syslog Registration settings 153
- Software Configuration 156
- Certificates 157
- Client export port settings 163
- Client/Server IP 164
- • Select All. Go to step 4 165
- Memory allocation settings 168
- Configuring asset polling 170
- TABLE 21 171
- Configuring SAN communication 172
- FTP/SCP/SFTP server settings 173
- Server port settings 178
- Support mode settings 179
- FIPS Support 181
- Fabric tracking 181
- Disabling fabric tracking 182
- User Account Management 187
- Viewing configured users 188
- User accounts 190
- Editing a user account 192
- Copying a user account 192
- Disabling a user account 195
- Enabling a user account 195
- Deleting a user account 195
- Unlocking a user account 196
- Creating a new role 196
- Editing a role 197
- Copying a role 198
- Deleting a role 198
- Adding privileges to a role 199
- Areas of responsibility 200
- Editing an AOR 201
- Copying an AOR 202
- Deleting an AOR 202
- Assigning products to an AOR 203
- Removing products from an AOR 203
- Password policies 204
- Loading an AD group 207
- Deleting an AD group 208
- Creating an AD user account 208
- User profiles 211
- Editing your user profile 212
- Changing your password 213
- Viewing your password policy 213
- Resetting optional messages 214
- Dashboard Management 215
- FIGURE 52 Dashboard tab 216
- Dashboard toolbar 217
- Dashboard messages 218
- General dashboard functions 219
- Accessing a dashboard 219
- Filtering the dashboards list 220
- Setting the dashboard display 221
- • Type — The type of monitor 222
- Setting the network scope 224
- Default dashboards 228
- Status widgets 229
- Events widget 231
- Host Adapter Inventory widget 233
- SAN Inventory widget 234
- SAN Status widget 236
- Status widget 237
- VM Alarms widget 238
- Port Health Violations widget 242
- Performance monitors 244
- Top Port C3 Discards monitor 247
- Top Port CRC Errors monitor 250
- Top Port Link Resets monitor 254
- Top Port Receive EOF monitor 256
- Top Port Sync Losses monitor 258
- Top Port Traffic monitor 260
- Monitor types 271
- Measures 271
- - Wireless 273
- • Traffic flows 273
- TABLE 25 Port measures types 278
- Common 287
- Wireless 288
- Traffic flow monitor types 289
- Traffic flow measures 289
- View Management 299
- SAN main toolbar 301
- View All list 302
- Port Display buttons 302
- Connectivity Map toolbar 303
- Product List 303
- Product List functions 304
- Connectivity Map 305
- Utilization Legend 306
- Resizing the Minimap 308
- Status bar 309
- Icon legend 310
- Host product icons 311
- SAN group icons 311
- Host group icons 312
- SAN port icons 312
- SAN product status icons 312
- Event icons 313
- Customizing the main window 314
- Exporting the topology 315
- Displaying columns 316
- Changing the order of columns 317
- Resizing the columns 317
- Sorting table information 317
- Copying table information 317
- Exporting table information 318
- Product List customization 319
- Editing a property label 320
- Deleting a property label 320
- Searching for a device 321
- Restricting a search by node 322
- Searching for an exact match 322
- SAN view management overview 323
- Editing a customized view 325
- Deleting a customized view 326
- Copying a view 327
- SAN topology layout 328
- Changing the product label 332
- Changing the port label 332
- Changing the port display 332
- Grouping on the topology 333
- Call Home 335
- overview 336
- System requirements 337
- Showing a Call Home center 340
- Hiding a Call Home center 340
- Editing a Call Home center 341
- Enabling a Call Home center 348
- Enabling supportSave 348
- Disabling a Call Home center 349
- Viewing Call Home status 350
- Defining an event filter 352
- Third-party tools 357
- About third-party tools 358
- Launching a Telnet session 359
- Launching an Element Manager 359
- Launching Web Tools 360
- Launching FCR configuration 361
- Launching Name Server 362
- Launching HCM Agent 362
- Launching Fabric Watch 363
- Adding a tool 363
- • Fabric and switch details 369
- Registering a SCOM server 370
- Editing a SCOM server 371
- Removing a SCOM server 371
- Server Management Console 373
- Services tab 374
- Refreshing the server status 375
- Stopping all services 375
- Stopping the CIMOM services 375
- Starting all services 376
- Restarting all services 376
- Ports tab 377
- AAA Settings tab 378
- FIGURE 116 AAA Settings tab 379
- Configuring a Radius server 380
- Configuring an LDAP server 383
- Configuring a TACACS+ server 386
- • Local Database 389
- Restore tab 391
- FIGURE 123 Restore tab 392
- HCM Upgrade tab 394
- SMI Agent Configuration Tool 395
- SLP on UNIX systems 400
- SLP on Windows systems 400
- Home tab 401
- Authentication tab 402
- FIGURE 128 Authentication tab 403
- CIMOM tab 405
- Configuring the CIMOM log 407
- Certificate Management tab 408
- Viewing a certificate 409
- Exporting a certificate 409
- Summary tab 410
- FIGURE 131 Summary tab 411
- TABLE 35 411
- SAN Device Configuration 413
- Deleting a configuration 421
- Exporting a configuration 421
- Importing a configuration 422
- Replicating configurations 423
- Step 3. Source Location 424
- Step 4. Source Configuration 424
- Step 5. Destination Switches 425
- TABLE 40 Step 6. Validation 426
- TABLE 41 Step 7. Summary 426
- Enhanced group management 429
- Firmware management 430
- FIGURE 138 Firmware download 431
- Importing a firmware file 434
- Deleting a firmware file 435
- Frame viewer 436
- Viewing port connectivity 439
- Enabling a port 443
- Disabling a port 443
- Filtering port connectivity 443
- Viewing port details 444
- Viewing ports 445
- Port types 445
- Showing connected ports 446
- Determining port status 449
- Viewing port optics 450
- Port commissioning overview 452
- Registering a CIMOM server 454
- Decommissioning an F-Port 458
- Recommissioning an F-Port 458
- Decommissioning an E-Port 459
- Recommissioning an E-Port 459
- AD-enabled fabric discovery 463
- Feature AD context 464
- Port Auto Disable 466
- Unblocking ports 472
- Host Port Mapping 473
- Creating a new Host 474
- Renaming an HBA Host 475
- Deleting an HBA Host 475
- Viewing Host properties 475
- Importing HBA-to-Host mapping 476
- • Checks for duplicate HBAs 477
- Removing an HBA from a Host 478
- Exporting Host port mapping 478
- • \root (Linux) 479
- Storage Port Mapping 481
- Creating a storage array 482
- Deleting a storage array 484
- TABLE 51 Import Results 486
- Host Management 489
- Brocade adapters 490
- Converged Network Adapters 491
- Fabric Adapters 491
- HCM software 492
- HCM features 493
- Host adapter discovery 494
- VM Manager 494
- Editing a VM Manager 495
- Deleting a VM Manager 495
- ESXi CIM listener ports 495
- Connectivity map 497
- View management 497
- Host port mapping 497
- Adapter software 498
- Driver repository 499
- Boot image repository 501
- Bulk port configuration 503
- Adding a port configuration 505
- Editing a port configuration 507
- Deleting a port configuration 507
- FAWWNs on attached AG ports 511
- Deleting AG port FAWWNs 512
- Role-based access control 513
- Host performance management 514
- Host security authentication 515
- Host fault management 517
- Filtering event notifications 518
- Backup support 519
- Fibre Channel over Ethernet 521
- Enhanced Ethernet features 522
- FCoE protocols supported 523
- FCoE licensing 524
- Saving running configurations 524
- DCB configuration management 525
- Switch policies 526
- DCB configuration 527
- Configuring LLDP 529
- Adding a LAG 532
- FIGURE 164 Add LAG dialog box 533
- Editing a DCB switch 534
- Editing a DCB port 535
- Editing a LAG 537
- Enabling a DCB port or LAG 539
- Deleting a LAG 539
- QoS configuration 540
- Creating a DCB map 541
- Editing a DCB map 542
- Deleting a DCB map 543
- Creating a Traffic Class map 544
- Editing a Traffic Class map 545
- Deleting a Traffic Class map 545
- FCoE provisioning 546
- VLAN classifier configuration 548
- Adding a VLAN classifier rule 549
- • ARP — 0x0808 550
- • IP — 0x8881 550
- • IPv6 — 0x86DD 550
- LLDP-DCBX configuration 552
- Adding an LLDP profile 553
- Editing an LLDP profile 554
- Deleting an LLDP profile 555
- 802.1x authentication 556
- FIGURE 172 802.1x dialog box 557
- Deploy to Products dialog box 559
- Deploy to Ports dialog box 559
- DCB performance 563
- Historical performance graph 565
- Historical performance report 565
- FCoE login groups 566
- Adding an FCoE login group 567
- Editing an FCoE login group 568
- Viewing virtual FCoE ports 570
- Clearing a stale entry 572
- Security Management 573
- Device_Name 574
- Port_Number 579
- • Save to running 585
- • Save to running and startup 585
- Virtual Fabrics requirements 596
- Logical switch type Ports 597
- Configuring Virtual Fabrics 600
- Enabling Virtual Fabrics 601
- Disabling Virtual Fabrics 601
- Deleting a logical switch 607
- SAN Encryption Configuration 613
- Encryption Center features 614
- Encryption user privileges 615
- Smart card usage 616
- Using system cards 621
- Deregistering system cards 623
- Using smart cards 623
- Tracking smart cards 623
- Editing smart cards 626
- Network connections 627
- Blade processor links 627
- (KAC) certificate 628
- Configuration parameters 630
- Key vault type and vendor 631
- Establishing the trusted link 639
- Data Encryption Keys 642
- <primary 652
- - HTTPS Port 433 655
- - SSH Port 22 655
- - Enable SSH 655
- - KM Server Port 9000 655
- - Enable KM Server 655
- Creating a client on TEKA 656
- KAC_Certificate_Name.der 660
- Setting FIPS compliance 664
- Creating a local CA 665
- Creating a server certificate 666
- -----BEGIN CERTIFICATE 669
- Creating a cluster 671
- Backing up the certificates 677
- Configuring the KMIP server 679
- Adding a node to the cluster 680
- Encryption preparation 683
- • Key Vault Type: 687
- (LKM/SSKM) 694
- (ESKM/SKM) 700
- Next Steps dialog box 709
- Protocol 714
- --initnode command 721
- --set -keyvault command 721
- --reg keyvault command 721
- 3. Click Next 722
- Error Instructions dialog box 726
- High availability clusters 728
- Creating HA clusters 729
- Failback option 731
- Invoking failback 731
- Adding an encryption target 732
- FIGURE 305 Next Steps screen 739
- Configuring storage arrays 747
- Remote replication LUNs 747
- SRDF pairs 748
- Moving targets 752
- Tape LUN statistics 756
- Encryption engine rebalancing 760
- Master keys 761
- Active master key 762
- Alternate master key 762
- Master key actions 763
- Creating a new master key 770
- Security settings 771
- Setting zeroization 772
- Redirection zones 774
- Disk device decommissioning 774
- Decommissioning disk LUNs 775
- Displaying Universal IDs 777
- Setting disk LUN Re-key All 778
- Thin provisioned LUNs 782
- Thin Provisioning support 783
- General tab 790
- Members tab 794
- Members tab Remove button 795
- Security tab 796
- HA Clusters tab 798
- Link Keys tab 800
- Tape Pools tab 801
- Tape pools overview 802
- Adding tape pools 803
- Engine Operations tab 804
- TABLE 64 Encryption acronyms 805
- Zoning overview 807
- Red Zone 808
- Green Zone 808
- Blue Zone 808
- Online zoning 809
- Offline zoning 809
- Zone database size 810
- Zoning configuration 811
- Creating a zone 812
- Viewing zone properties 812
- Adding members to a zone 813
- Creating a member in a zone 814
- Removing a member from a zone 815
- Renaming a zone 815
- Deleting a zone 816
- Duplicating a zone 816
- Creating a zone alias 818
- Editing a zone alias 819
- Exporting zone aliases 820
- Renaming a zone alias 820
- Deleting a zone alias 821
- Duplicating a zone alias 821
- Creating a zone configuration 821
- Renaming a zone configuration 825
- Deleting a zone configuration 826
- Refreshing a zone database 828
- Merging fabrics 829
- Merging two zone databases 829
- LSAN zones 833
- Configuring LSAN zoning 834
- Creating an LSAN zone 835
- LSAN tagging 838
- Traffic Isolation zones 839
- Boot LUN zones 844
- Creating a Boot LUN zone 845
- Modifying a Boot LUN zone 845
- Zoning administration 846
- Listing zone members 852
- Listing un-zoned members 853
- Removing an offline device 853
- Replacing zone members 854
- Fibre Channel over IP 857
- FCIP services licensing 858
- FCIP Concepts 858
- IP network considerations 858
- TABLE 66 FCIP capabilities 859
- FCIP trunking 860
- Circuit Failover Grouping 863
- Adaptive Rate Limiting 865
- Configuring QoS Priorities 867
- Term Definition 869
- QOS, DSCP, and VLANs 870
- Open systems tape pipelining 872
- FICON emulation features 873
- Tape write pipelining 874
- Tape read pipelining 874
- Teradata pipelining 874
- Planning the configuration 876
- When to enable Fast Write 879
- Compression mode 880
- SRDF considerations 880
- FCIP configuration guidelines 881
- Configuring an FCIP tunnel 881
- Adding an FCIP circuit 884
- Circuit configuration failure 889
- Enabling Tperf test mode 891
- Configuring QoS percentages 891
- Configuring FICON emulation 893
- FCIP connection properties 895
- Viewing FCIP port properties 898
- VE/VEx port properties 899
- (Figure 374) 899
- GbE port properties 899
- Editing FCIP circuits 900
- Disabling FCIP tunnels 901
- Enabling FCIP tunnels 901
- Deleting FCIP tunnels 902
- Disabling FCIP circuits 902
- Enabling FCIP circuits 902
- Deleting FCIP Circuits 902
- (Figure 378) 906
- Fabric Binding 909
- Enabling fabric binding 911
- Disabling fabric binding 912
- Port Fencing 917
- Thresholds 920
- C3 Discard Frames threshold 921
- Invalid CRCs threshold 922
- Invalid words threshold 922
- Link Reset threshold 922
- Protocol error threshold 922
- State Change threshold 922
- Adding thresholds 923
- Adding a Link Reset threshold 927
- Assigning thresholds 931
- Unblocking a port 932
- Editing thresholds 933
- Finding assigned thresholds 937
- Viewing thresholds 937
- Removing thresholds 938
- FICON Environments 941
- Configuring the switch 944
- • “Enabling Virtual Fabrics” 947
- Configuring FICON display 949
- Cascaded FICON fabric 956
- Cascaded FICON fabric merge 959
- Resolving merge conflicts 963
- Port groups 964
- Creating a port group 965
- Viewing port groups 966
- Editing a port group 966
- Swapping blades 967
- VLAN Management 969
- Private VLAN 970
- Remote Switched Port Analyzer 970
- Displaying a list of VLANs 971
- VLAN Manager tabs 972
- Port VLANs 974
- Assigning DCB ports to a VLAN 977
- Adding VLAN properties 978
- Deploying VLAN configurations 981
- Target context STP type 983
- Configuring MSTP on a product 984
- Adding an MSTP instance 986
- VLAN routing 987
- Deployment Manager 991
- Deploying a configuration 993
- Viewing deployment logs 994
- FC troubleshooting 997
- Tracing FC routes 998
- Adding a detached device 1000
- 53-1002948-01 1001
- Port diagnostics requirements 1002
- • Link traffic 1003
- • Latency measurement 1003
- • Measure link distance 1003
- FCIP troubleshooting 1006
- TABLE 81 IP Ping Details 1007
- Tracing IP routes 1008
- TABLE 82 IP Trace Details 1009
- Field/Component Description 1010
- Performance Data 1011
- SAN performance measures 1012
- Example of SNMP v1 1014
- SAN performance overview 1015
- Example of showing FCIP-MIB 1017
- Example of enabling FCIP-MIB 1017
- Example for FC ports 1018
- Example for FCIP tunnels 1018
- Graph display 1020
- Clearing port counters 1021
- • 5 minutes for last 8 days 1025
- Configuring the graph display 1026
- Filtering data by ports 1027
- Filtering data by time 1027
- Performance database views 1029
- SAN end-to-end monitoring 1030
- SAN Top Talker monitoring 1034
- Pausing a Top Talker monitor 1038
- Bottleneck detection 1039
- How bottlenecks are reported 1040
- Example 1046
- FIGURE 422 Threshold example 1047
- Assigning a threshold policy 1050
- SAN connection utilization 1051
- • Press CTRL + U 1052
- Configuring graph options 1055
- Flow Vision 1058
- Why Flow Vision exists 1059
- Fabric Vision components 1059
- Flow Vision licensing 1059
- Flow Vision support 1060
- Provisioning flows 1062
- - Switch 1063
- - Switch port 1063
- - Initiator port 1063
- - Target port 1063
- Configuring Basic Options 1065
- Configuring Advanced Options 1067
- FIGURE 438 Frame Type Picker 1068
- Flow definition examples 1069
- Monitoring Flows 1071
- Flows panel right-click menus 1074
- Flow Definitions panel 1074
- Flows panel 1075
- Column Information Displayed 1077
- Using the Performance Graph 1079
- Flow Vision features 1082
- Flow Monitor 1083
- Flow Generator 1084
- About test flows 1085
- Port characteristics 1086
- Flow parameter support 1088
- General flow parameter rules 1090
- Parameter Rules 1091
- Frame Viewer 1093
- Bottleneck Detection 1094
- Trace route and ping 1095
- Port connectivity 1097
- Top Talkers 1098
- End-to-End Monitors 1098
- Frame Monitor 1100
- Pre-defined frame types 1101
- Custom frame types 1101
- Frame Monitoring requirements 1102
- Editing a frame monitor 1104
- Policy Monitor 1108
- Fabric policy monitors 1109
- Host policy monitors 1112
- Preconfigured policy monitors 1114
- Viewing policy monitor status 1115
- Adding a policy monitor 1116
- Policy monitor scheduling 1122
- Editing a policy monitor 1123
- Deleting a policy monitor 1124
- Running a policy monitor 1124
- Policy_Name 1125
- Fault Management 1132
- Event notification 1133
- ATTENTION 1134
- Defining filters 1135
- SNMP traps 1138
- SNMP trap forwarding 1140
- Adding a trap destination 1141
- Adding a new trap filter 1142
- Event reception 1144
- Adding an SNMP v3 credential 1146
- Trap customization 1149
- - Information about the trap 1150
- SNMP informs 1151
- Adding a syslog recipient 1152
- Removing a syslog recipient 1153
- Syslog forwarding 1154
- Adding a syslog filter 1155
- Event action definitions 1157
- Configuring varbind filters 1160
- Editing event actions 1164
- Special events handling 1166
- Acknowledging special events 1166
- Pseudo events 1172
- Setting pseudo event policies 1173
- Filtering pseudo event traps 1174
- Event custom reports 1183
- Defining report settings 1184
- Defining the report identity 1185
- Editing a report definition 1190
- Event custom report schedules 1191
- Event logs 1194
- Copying part of a log entry 1195
- Copying an entire log entry 1195
- Exporting the entire log 1195
- TABLE 104 Event Properties 1197
- Copying the entire Master Log 1198
- Exporting the Master Log 1199
- The ‘unnamed’ filter 1201
- The ‘none’ filter 1201
- Editing a Filter 1201
- Duplicating a Filter 1201
- Deleting a Filter 1201
- Notes on filters 1202
- In this chapter 1204
- Supported hardware 1205
- MAPS license requirements 1205
- Enabling MAPS on a device 1206
- Virtual Fabrics 1207
- High availability 1207
- Admin Domains 1207
- Fabric Watch 1207
- MAPS structural elements 1212
- MAPS monitoring categories 1215
- Measure Description 1216
- Fabric monitoring category 1217
- FRU monitoring category 1218
- Security monitoring category 1218
- Resource monitoring category 1219
- FCIP monitoring category 1219
- TABLE 115 Traffic measures 1220
- MAPS policies 1221
- MAPS rules 1222
- MAPS conditions 1223
- MAPS actions 1224
- SNMP MIB support 1226
- Viewing MAPS policy data 1228
- Configuring a MAPS policy 1230
- Editing a MAPS policy 1233
- Cloning a MAPS policy 1233
- Importing Flow definitions 1234
- Removing imported Flows 1235
- Activating a MAPS policy 1235
- Exporting a MAPS policy 1236
- Importing a MAPS policy 1237
- Deleting a MAPS policy 1237
- Viewing MAPS policy rules 1238
- MAPS groups 1240
- User-defined groups 1241
- Configuring a group 1241
- Editing a group 1243
- Deleting a group 1244
- Fabric/Device_Name 1245
- Creating multiple groups 1246
- Editing multiple groups 1246
- MAPS violations 1248
- MAPS events 1250
- Event field Description 1252
- Dashboard MAPS widgets 1253
- Master Log 1253
- Technical Support 1254
- Device technical support 1258
- Field Description 1261
- Upload failure data capture 1264
- Reports overview 1268
- SAN report types 1269
- Generating SAN reports 1269
- Viewing SAN reports 1270
- Exporting SAN reports 1271
- Printing SAN reports 1271
- Deleting SAN reports 1272
- Generating SAN zoning reports 1274
- Application menus 1276
- SAN main menus 1277
- SAN shortcut menus 1287
- Call Home Event Tables 1302
- TABLE 120 # Thermal Events 1303
- TABLE 121 Fabric OS Events 1303
- Fabric OS Events (Continued) 1304
- Event Categories 1306
- Product audit events 1307
- Security events 1308
- User action events 1309
- Management server events 1309
- Product events 1310
- User Privileges 1312
- About user privileges 1313
- • Fabric Ports 1317
- • Fabric Summary 1317
- Information Model 1326
- Object Manager 1326
- About Roles and Access Levels 1329
- Device Properties 1332
- Viewing SAN device properties 1333
- SAN device properties 1334
- Device properties (Continued) 1334
- Viewing Storage properties 1336
- Viewing port properties 1340
- TABLE 129 Port properties 1341
- • Authentication Algorithm 1342
- • Encryption Algorithm 1342
- • Diffie-Hellman 1342
- • SA Life 1342
- Port properties (Continued) 1343
- • IP Ping 1344
- • IP Traceroute 1344
- • IP Performance 1344
- Viewing VC module properties 1345
- TABLE 130 Properties tab 1346
- TABLE 131 Port tab 1346
- TABLE 132 NPIV WWNs tab 1346
- Host properties 1347
- Properties customization 1349
- Adding a property field 1350
- Editing a property field 1350
- Deleting a property field 1351
- Regular Expressions 1352
- TABLE 2 Character classes 1353
- TABLE 1 Characters 1353
- TABLE 7 Boundary matches 1354
- TABLE 8 Greedy quantifiers 1355
- TABLE 9 Reluctant quantifiers 1355
- TABLE 11 Logical operators 1355
- TABLE 12 Back references 1356
- Troubleshooting 1358
- Browser troubleshooting 1359
- FICON troubleshooting 1361
- Launch Client troubleshooting 1363
- Names troubleshooting 1365
- Patch troubleshooting 1365
- Performance troubleshooting 1366
- Port Fencing troubleshooting 1370
- Server troubleshooting 1370
- Supportsave troubleshooting 1372
- View All list troubleshooting 1373
- Wireless troubleshooting 1374
- Zoning troubleshooting 1374
- Database Fields 1376
- TABLE 19 ACH_EVENT_FILTER_MAP 1377
- TABLE 20 ACH_FILTER 1377
- TABLE 21 ACH_INFO 1377
- TABLE 22 AD_GROUP 1377
- TABLE 25 AOR_DEVICE_GROUP_MAP 1378
- TABLE 26 AOR_DEVICE_MAP 1378
- TABLE 27 AOR_FABRIC_MAP 1378
- • 1 - Text Box 1379
- • 2 - List Box 1379
- • 3 - Radio Button 1379
- Database tables and fields 1380
- BIRTREPORT_RUN_TEMPLATE 1380
- BIRTREPORT_SCHEDULE_CONFIG 1380
- TABLE 36 BOOT_LUN_SEQUENCE 1381
- TABLE 38 CAPABILITY_ 1381
- TABLE 39 CARD 1381
- TABLE 39 CARD (Continued) 1382
- • 0 - 1G 1383
- • 1 - 10G 1383
- • 2 - Dual mode 1383
- • 3 - Failover mode 1383
- TABLE 45 CLIENT_VIEW 1384
- TABLE 46 CLIENT_VIEW_COLUMN 1384
- TABLE 44 CEE_PORT (Continued) 1384
- TABLE 47 CLIENT_VIEW_MEMBER 1385
- TABLE 49 CLUSTER 1385
- TABLE 50 CLUSTER_MEMBER 1385
- TABLE 51 CNA_ETH_PORT 1386
- TABLE 53 CNA_ETH_PORT_CONFIG 1386
- TABLE 54 CNA_PORT 1387
- TABLE 55 COLLECTOR 1387
- TABLE 59 CORE_SWITCH 1388
- CORE_SWITCH (Continued) 1389
- TABLE 61 CORE_SWITCH_CHECKSUM 1390
- TABLE 63 CORE_SWITCH_DETAILS 1390
- • 1 is supported 1391
- • 0 is not supported 1391
- TABLE 64 CRYPTO_HOST 1392
- TABLE 65 CRYPTO_LUN 1393
- CRYPTO_LUN (Continued) 1394
- TABLE 66 CRYPTO_SWITCH 1395
- CRYPTO_TARGET_CONTAINER 1396
- CRYPTO_SWITCH (Continued) 1396
- TABLE 69 DASHBOARD 1397
- TABLE 70 DASHBOARD_CANVAS 1398
- TABLE 72 DASHBOARD_PROVIDER 1398
- TABLE 73 DASHBOARD_WIDGET 1399
- TABLE 75 DEFAULT_FAVORITES 1400
- DEFAULT_WIDGET_PREFERENCE 1401
- DEPLOYMENT_CONFIGURATION 1401
- DEFAULT_FAVORITES (Continued) 1401
- • 1-Presnapshot 1402
- • 2-Postsnapshot 1402
- • 3-Pre & Post snapshot 1402
- TABLE 80 DEPLOYMENT_STATUS 1403
- TABLE 82 DEVICE 1404
- TABLE 82 DEVICE (Continued) 1405
- • 0 indicates not registered 1406
- • 1 indicates registered 1406
- TABLE 83 DEVICE_ENCLOSURE 1410
- TABLE 85 DEVICE_FDMI_DETAILS 1411
- TABLE 86 DEVICE_GROUP 1412
- TABLE 87 DEVICE_GROUP_ENTRY 1413
- TABLE 88 DEVICE_NODE 1413
- TABLE 89 DEVICE_PORT 1414
- TABLE 92 ENCRYPTION_ENGINE 1415
- TABLE 93 ENCRYPTION_GROUP 1416
- ENCRYPTION_GROUP (Continued) 1417
- ENCRYPTION_GROUP_MEMBER 1418
- ENCRYPTION_KMIP_PARAMETERS 1418
- TABLE 97 ETHERNET_CLOUD 1419
- TABLE 98 ETHERNET_INTERFACE 1420
- TABLE 99 ETHERNET_ISL 1420
- TABLE 100 EVENT 1420
- TABLE 101 EVENT_CALL_HOME 1421
- TABLE 100 EVENT (Continued) 1421
- TABLE 102 EVENT_CATEGORY 1422
- TABLE 103 EVENT_DESCRIPTION 1422
- TABLE 104 EVENT_DETAILS 1422
- TABLE 105 EVENT_INSTANCE 1423
- TABLE 107 EVENT_PROCESSOR_MAP 1424
- TABLE 108 EVENT_RULE 1424
- • 0 = Disabled 1425
- • 1 = Enabled 1425
- • 0 = second 1425
- • 1 = Minutes 1425
- • 2 = Hours 1425
- TABLE 109 FABRIC (Continued) 1426
- TABLE 110 FABRIC_CHECKSUM 1427
- TABLE 111 FABRIC_COLLECTION 1427
- TABLE 112 FABRIC_MEMBER 1427
- TABLE 116 FAVORITES 1428
- TABLE 119 FCIP_TUNNEL 1429
- FCIP_TUNNEL (Continued) 1430
- FCIP_TUNNEL_CIRCUIT 1432
- FCIP_TUNNEL_PERFORMANCE 1434
- TABLE 122 FCOE_DEVICE 1435
- TABLE 123 FCR_ROUTE 1436
- TABLE 124 FEATURE 1436
- TABLE 125 FEATURE_EDITION_MAP 1436
- TABLE 126 FEATURES_USAGE 1436
- TABLE 127 FICON_DEVICE_PORT 1436
- FIRMWARE_FILE_DETAIL 1437
- FIRMWARE_SWITCH_DETAIL 1437
- FICON_DEVICE_PORT (Continued) 1437
- TABLE 130 FOUNDRY_DEVICE 1438
- TABLE 131 FOUNDRY_MODULE 1438
- TABLE 134 FPORT_TRUNK_GROUP 1439
- TABLE 135 FPORT_TRUNK_MEMBER 1439
- TABLE 136 FRU 1439
- TABLE 136 FRU (Continued) 1440
- TABLE 137 FTP_SERVER 1441
- TABLE 139 GIGE_PORT 1441
- TABLE 141 GIGE_PORT_STATS 1442
- TABLE 142 GLOBAL_VLAN 1443
- TABLE 144 HA_CLUSTER 1443
- TABLE 145 HBA 1444
- TABLE 145 HBA (Continued) 1445
- • HBA/CNA/AnyIO/Mezzanine 1446
- • 0 - Unknow 1447
- • 1 - Yes 1447
- • 2 - No 1447
- HBA_PORT_DETAIL (Continued) 1448
- HBA_PORT_DEVICE_PORT_MAP 1450
- HBA_PORT_FCOE_DETAILS 1450
- TABLE 151 HBA_REMOTE_PORT 1451
- HBA_REMOTE_PORT (Continued) 1452
- TABLE 153 HBA_TARGET 1453
- HOST_DISCOVERY_OPTION 1454
- HBA_TARGET (Continued) 1454
- TABLE 157 IFL 1455
- TABLE 158 INM_IP_INTERFACE 1455
- TABLE 159 INTERFACE 1456
- TABLE 161 IP_INTERFACE 1457
- TABLE 162 IP_PORT_GROUP 1457
- TABLE 163 IP_ROUTE 1457
- • 0 denotes untrusted 1458
- • 1 denotes trusted 1458
- • 0 denotes present 1459
- TABLE 168 ISL_TRUNK_GROUP 1460
- TABLE 169 ISL_TRUNK_MEMBER 1460
- TABLE 167 ISL_CONNECTION 1460
- TABLE 170 KEY_VAULT 1461
- TABLE 173 L2_NEIGHBOR 1462
- TABLE 174 LAG 1462
- TABLE 175 LAG_MEMBER 1463
- TABLE 174 LAG (Continued) 1463
- TABLE 178 LICENSE 1464
- TABLE 180 LICENSE_FEATURE_MAP 1465
- TABLE 181 LICENSE_RULE 1465
- TABLE 182 LICENSED_FEATURE 1466
- TABLE 183 LINK 1466
- TABLE 184 LOCK 1466
- TABLE 185 LSAN_DEVICE 1466
- TABLE 186 LSAN_TAG_CONFIG 1466
- TABLE 187 LSAN_PROXY_DEVICE 1467
- TABLE 188 LSAN_ZONE 1467
- TABLE 189 LSAN_ZONE_DB_CONFIG 1467
- • Deployed(0) 1468
- • Undeployed(1) 1468
- TABLE 196 MAPS_EVENT 1469
- TABLE 197 MAPS_EVENT_DETAILS 1469
- TABLE 199 MAPS_POLICY 1470
- TABLE 200 MARCHING_ANTS 1470
- TABLE 201 MESSAGE_RECIPIENT 1470
- TABLE 202 MODULE 1471
- TABLE 203 MODULE_SLOT_PRESENT 1471
- TABLE 204 MODULE_TYPE 1471
- TABLE 205 MPLS_ADMIN_GROUP 1472
- TABLE 207 MPLS_LSP 1472
- TABLE 208 MPLS_PATH 1472
- TABLE 209 MPLS_PATH_HOP 1473
- TABLE 210 MPLS_RSVP_LSP 1473
- Field Definition Format Size 1474
- MPLS_RSVP_LSP_PARAMETERS 1475
- TABLE 216 MPLS_RSVP_LSP_PATH 1476
- TABLE 218 MPLS_SERVICE 1476
- MPLS_SERVICE_DEVICE_RELATION 1477
- MPLS_SERVICE (Continued) 1477
- TABLE 222 MRP_RING 1478
- TABLE 223 MRP_RING_DEVICE 1478
- MRP_RING_DEVICE (Continued) 1479
- TABLE 224 N2F_PORT_MAP 1480
- TABLE 225 NETWORK_VLAN 1480
- TABLE 226 NETWORK_SCOPE_TYPE 1480
- TABLE 227 NPORT_WWN_MAP 1480
- TABLE 228 NP_FLOW_DEFINITION 1480
- TABLE 229 NP_SUB_FLOW 1481
- TABLE 231 OUI_VENDOR 1482
- TABLE 232 PHANTOM_PORT 1483
- TABLE 233 PHYSICAL_DEVICE 1483
- TABLE 234 PHYSICAL_INTERFACE 1484
- TABLE 235 PHYSICAL_PORT 1485
- TABLE 239 PM_DASHBOARD_WIDGET 1486
- TABLE 240 PM_DATA_COLLECTOR 1487
- TABLE 241 PM_MEASURE 1488
- TABLE 250 POE_THRESHOLD 1490
- TABLE 251 POE_THRESHOLD_EVENT 1490
- PORT_BOTTLENECK_CONFIG 1491
- PORT_BOTTLENECK_STATUS 1491
- PORT_COMMISSION_CIMOM_SERVER 1491
- TABLE 255 PORT_FENCING_POLICY 1492
- TABLE 257 PORT_PROFILE 1493
- PORT_PROFILE_MAC_MAP 1494
- PORT_PROFILE_QOS_MAP 1494
- PORT_PROFILE_QOS_PFC_MAP 1494
- TABLE 264 PRIVILEGE 1496
- TABLE 265 PRODUCT_APP 1496
- TABLE 266 PROTOCOL_VLAN 1497
- TABLE 267 QRTZ_BLOB_TRIGGERS 1497
- TABLE 268 QRTZ_CALENDARS 1497
- TABLE 269 QRTZ_CRON_TRIGGERS 1497
- TABLE 270 QRTZ_FIRED_TRIGGERS 1497
- TABLE 281 REPORT_TYPE 1500
- TABLE 282 REPORT_TEMPLATE 1500
- • 0= Not Hidden 1501
- • 1= Hidden 1501
- TABLE 289 SAN 1502
- TABLE 290 SAN_CONNECTION 1502
- TABLE 291 SCOM_HOST 1503
- TABLE 292 SECURITY_POLICY 1503
- TABLE 294 SENSOR 1504
- TABLE 295 SFLOW_CHECKPOINT 1505
- TABLE 296 SFLOW_HOUR_SUMMARY 1505
- TABLE 294 SENSOR (Continued) 1505
- • 0 means its edge port 1507
- • 1 means its trill port 1507
- TABLE 300 SFLOW_MINUTE_L3 1508
- • 1 means its fabric port 1509
- TABLE 305 SFLOW_MINUTE_VLAN 1510
- TABLE 309 SFLOW_STAGING 1511
- SFLOW_STAGING (Continued) 1512
- TABLE 310 SFLOW_STAGING_SLNUM 1513
- TABLE 311 SLOT 1513
- TABLE 312 SMART_CARD 1513
- • 1-Pre snapshot 1514
- • 2-Post snapshot 1514
- • device level collector is 0 1515
- TABLE 317 SNMP_DATA_1DAY 1516
- TABLE 318 SNMP_DATA_2HOUR 1516
- TABLE 319 SNMP_DATA_30MIN 1516
- • device - 0 or 1517
- • interface or ports - 1 1517
- TABLE 324 SNMP_EXPRESSION 1518
- TABLE 325 SNMP_PROFILE 1518
- SNMP_PROFILE (Continued) 1519
- TABLE 328 SSL_KEY_PASSWORD 1520
- TABLE 329 STATS_AGING 1520
- TABLE 330 SUB_INTERFACE 1521
- TABLE 331 SUB_PORT_VLAN 1521
- TABLE 334 SWITCH_LICENSE 1522
- TABLE 335 SWITCH_MODEL 1522
- TABLE 336 SWITCH_PORT 1523
- SWITCH_PORT (Continued) 1524
- TABLE 339 SYSTEM_PROPERTY 1527
- TABLE 340 TARGET_TYPE 1528
- TABLE 341 THIRD_PARTY_DEVICE 1528
- TABLE 342 THRESHOLD_MEASURE 1528
- TABLE 343 TIME_SERIES_DATA 1528
- TIME_SERIES_DATA_1DAY 1529
- TIME_SERIES_DATA_2HOUR 1529
- TIME_SERIES_DATA_30MIN 1529
- TIME_SERIES_DATA (Continued) 1529
- TABLE 347 TIME_SERIES_DATA_1 1530
- TIME_SERIES_DATA_1_1DAY 1531
- TIME_SERIES_DATA_1_2HOUR 1531
- TIME_SERIES_DATA_1_30MIN 1532
- TABLE 351 TIME_SERIES_DATA_2 1533
- TIME_SERIES_DATA_2_2HOUR 1534
- TABLE 355 TIME_SERIES_DATA_3 1535
- TIME_SERIES_DATA_3_1DAY 1536
- TIME_SERIES_DATA_3_2HOUR 1536
- TIME_SERIES_DATA_3_30MIN 1537
- TABLE 359 TIME_SERIES_DATA_4 1538
- TIME_SERIES_DATA_4_2HOUR 1539
- TIME_SERIES_DATA_4_30MIN 1539
- TABLE 363 TOOL_APP 1540
- TABLE 364 TOOL_PATH 1540
- TABLE 365 TOPO_MAP_IMAGE 1540
- TABLE 366 TRILL 1541
- TABLE 367 TRILL_TRUNK_GROUP 1541
- TABLE 368 TRILL_TRUNK_MEMBER 1541
- • 0=Disabled 1542
- • 1=Enabled 1542
- TABLE 371 USER_ (Continued) 1543
- TABLE 375 USER_PREFERENCE 1544
- TABLE 377 USER_RESOURCE_MAP 1544
- TABLE 378 USER_ROLE_MAP 1544
- • Loose(0) 1545
- • Strict(1) 1545
- • Disabled(0) 1546
- • Enabled(1) 1546
- • 0? Virtual Server 1547
- • 1 ? Real Server 1547
- VIRTUAL_FCOE_PORT_MAC_MEMBER 1548
- VIRTUAL_FCOE_PORT_STAT 1548
- VIRTUAL_FCOE_PORT (Continued) 1548
- VIRTUAL_FCOE_PORT_STAT_2HR 1549
- VIRTUAL_FCOE_PORT_STAT_30M 1550
- • 1-Enabled 1551
- • 0-disabled 1551
- • 0 is switch mode 1551
- • 2 is ag mode 1551
- VIRTUAL_SWITCH (Continued) 1552
- VIRTUAL_SWITCH_CAPABILITY 1555
- VIRTUAL_SWITCH_CHECKSUM 1555
- VIRTUAL_SWITCH_COLLECTION 1555
- TABLE 402 VLL_DEVICE_RELATION 1557
- TABLE 404 VMOTION_EVENT 1557
- TABLE 406 VM_DATA_CENTER 1558
- TABLE 408 VM_DV_PORT 1559
- TABLE 409 VM_DV_PORT_GROUP 1560
- TABLE 410 VM_DV_SWITCH 1561
- TABLE 412 VM_FC_HBA 1562
- • Fabric 1563
- • Point to point 1563
- • Unknown 1563
- VM_HOST_END_DEV_CONNECTIVITY 1564
- VM_HOST_PROXY_SWITCH 1564
- VM_HOST (Continued) 1564
- TABLE 418 VM_HOST_VIRTUAL_NIC 1565
- TABLE 419 VM_NETWORK_SETTINGS 1566
- TABLE 421 VM_PATH 1567
- TABLE 422 VM_PHYSICAL_NIC 1568
- TABLE 421 VM_PATH (Continued) 1568
- TABLE 423 VM_SECURITY_POLICY 1569
- • VMKernel 1570
- • Service Console 1570
- TABLE 427 VM_STORAGE 1571
- TABLE 430 VM_VCENTER 1572
- TABLE 431 VM_VCENTER_MEMBER 1573
- TABLE 433 VM_VIRTUAL_MACHINE 1575
- VPLS_DEVICE_RELATION 1576
- VPLS_ENDPOINT_RELATION 1576
- TABLE 437 VR_CONN_DOMAIN 1577
- TABLE 440 VR_CONN_MODULE 1578
- TABLE 441 VR_CONN_MODULE_PORT 1578
- TABLE 443 VR_CONN_WWN 1579
- TABLE 444 WT_ARCHIVE 1579
- TABLE 445 ZONE 1579
- TABLE 446 ZONE_ALIAS 1580
- TABLE 447 ZONE_ALIAS_IN_ZONE 1580
- TABLE 448 ZONE_ALIAS_MEMBER 1580
- TABLE 449 ZONE_DB 1580
- TABLE 445 ZONE (Continued) 1580
- TABLE 450 ZONE_DB_CONFIG 1581
- TABLE 451 ZONE_DB_USERS 1581
- TABLE 452 ZONE_IN-ZONE_SET 1581
- TABLE 453 ZONE_MEMBER 1581
- TABLE 449 ZONE_DB (Continued) 1581
- ADAPTER_PORT_CONFIG_INFO 1582
- AG_CONNECTION_INFO 1582
- BOOT_IMAGE_FILE_DETAILS_INFO 1583
- CNA_ETH_PORT_CONFIG_INFO 1583
- CNA_PORT_DETAILS_INFO 1584
- CNA_PORT_INFO 1584
- CORE_SWITCH_DETAILS_INFO 1585
- CRYPTO_HOST_LUN_INFO 1586
- CRYPTO_TARGET_ENGINE_INFO 1587
- DASHBOARD_PREFERENCES_INFO 1587
- DEPLOYMENT_INFO 1588
- DEPLOYMENT_LOG 1588
- DEVICE_CONNECTION_INFO 1589
- EE_MONITOR_STATS_5MIN_INFO 1590
- EE_MONITOR_STATS_30MIN_INFO 1590
- EE_MONITOR_STATS_2HOUR_INFO 1590
- EE_MONITOR_STATS_1DAY_INFO 1591
- TE_PORT_STATS_5MIN_INFO 1591
- TE_PORT_STATS_30MIN_INFO 1591
- TE_PORT_STATS_2HOUR_INFO 1592
- TE_PORT_STATS_1DAY_INFO 1592
- SWITCH_INFO 1593
- DEVICE_INFO 1595
- N2F_PORT_MAP_INFO 1596
- DEVICE_NODE_INFO 1596
- DEVICE_PORT_INFO 1597
- DEV_PORT_GIGE_PORT_LINK_INFO 1598
- DEV_PORT_MAC_ADDR_MAP_INFO 1599
- ISL_CONNECTION_INFO 1599
- ISL_INFO 1600
- ETHERNET_ISL_INFO 1601
- EVENT_DETAILS_INFO 1601
- EVENT_INFO 1602
- FABRIC_INFO 1603
- FCIP_TUNNEL_CIRCUIT_INFO 1604
- FCIP_TUNNEL_INFO 1605
- FCOE_DEVICE_INFO 1606
- FRU_INFO 1607
- GIGE_PORT_ECLOUD_LINK_INFO 1607
- GIGE_PORT_INFO 1608
- HBA_PORT_DETAILS_INFO 1608
- HBA_TARGET_INFO 1610
- HEALTH_STATUS_INFO 1611
- HOST_DISCOVERY_REQUEST_INFO 1612
- IFL_INFO 1613
- ISL_TRILL_INFO 1614
- ISL_TRUNK_GROUP_MEMBER_INFO 1616
- ISL_TRUNK_INFO 1616
- L2_NEIGHBOR_INFO 1617
- MAPS_EVENT_DETAILS_INFO 1617
- MODULE_INFO 1618
- NPORT_WWN_MAP_INFO 1619
- PHANTOM_PORT_INFO 1620
- PRODUCT_INFO 1620
- PORT_BOTTLENECK_CONF_INFO 1623
- PORT_BOTTLENECK_STAT_INFO 1623
- PORT_GROUP_INFO 1623
- ROLE_PRIVILEGE_INFO 1624
- PORT_PROFILE_INFO 1624
- PORT_PROFILE_INTERFACE_INFO 1625
- PORT_PROFILE_MAC_INFO 1625
- PORT_VLAN_INFO 1626
- SFLOW_MINUTE_L3_VIEW 1628
- SFLOW_MINUTE_MAC_VIEW 1629
- SCOM_EE_MONITOR_INFO 1630
- SENSOR_INFO 1631
- SMART_CARD_USAGE_INFO 1631
- SWITCH_CONFIG_INFO 1632
- SWITCH_DETAILS_INFO 1633
- SWITCH_DISCOVERED_MAC_INFO 1635
- SWITCH_PORT_INFO 1635
- SWITCH_SNMP_INFO 1637
- TIME_SERIES_DATA_INFO 1639
- TIME_SERIES_DATA_VIEW 1640
- TRILL_INFO 1641
- TRILL_TRUNK_INFO 1642
- USER_ROLE_RESOURCE_INFO 1642
- VIRTUAL_FCOE_PORT_INFO 1643
- VIRTUAL_PORT_WWN_DETAILS_INFO 1643
- VM_ADDRESS_INFO 1644
- VM_CONNECTIVITY_INFO 1645
- VM_DATASTORE_DETAILS_INFO 1647
- VM_EE_MONITOR_INFO 1648
- VM_HOST_INFO 1648
- VM_LUN_INFO 1649
- VM_STATISTICS_INFO 1650
- VR_CONN_MODULE_INFO 1652
- VR_CONN_MODULE_PORT_INFO 1653
- VR_CONN_NPIV_INFO 1654
- VMM_DISCOVERED_MAC_INFO 1655
- ZONE_DB_INFO 1656
- PHYSICAL_DEVICE_INFO 1660
- SLOT_INFO 1660
- MANAGED_ELEMENT_INFO 1660
- SNMP_DATA_INFO 1661
- SNMP_EXPR_DATA_INFO 1661
- SNMP_DATA_VIEW 1661
- VM_VNETWORK_INFO 1663
- VCS_CLUSTER_MEMBER_INFO 1665
- RESET_VCS_LICENSED 1665
- WIRELESS_INTERFACE 1666
- WIRED_INTERFACE 1667
- CEE_PORT_INFO 1668
Verwandte Produkte und Handbücher für Software Brocade Network Advisor SAN User Manual v12.1.0
(194 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.131 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern