Brocade Mobility RFS Controller CLI Reference Guide (Suppo Bedienungsanleitung PDF herunterladen (Seite 78)

60 Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

Supported in the following platforms:

• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,

Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade

Mobility 1240 Access Point

• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade

Mobility RFS7000

• Service Platforms — Brocade Mobility RFS9510

Syntax:

ping <IP/HOSTNAME> {count <1-10000>|dont-fragment {count|size}|size <1-64000>}

Parameters

ping <IP/HOSTNAME> {count <1-10000>|dont-fragment {count|size}|size <1-64000>}

Example

rfs7000-37FABE>ping 172.16.10.4 count 6

PING 172.16.10.4 (172.16.10.4): 100 data bytes

108 bytes from 172.16.10.4: seq=0 ttl=64 time=0.851 ms

108 bytes from 172.16.10.4: seq=1 ttl=64 time=0.430 ms

108 bytes from 172.16.10.4: seq=2 ttl=64 time=0.509 ms

108 bytes from 172.16.10.4: seq=3 ttl=64 time=0.507 ms

108 bytes from 172.16.10.4: seq=4 ttl=64 time=0.407 ms

108 bytes from 172.16.10.4: seq=5 ttl=64 time=0.402 ms

--- 172.16.10.4 ping statistics ---

6 packets transmitted, 6 packets received, 0% packet loss

round-trip min/avg/max = 0.402/0.517/0.851 ms

rfs7000-37FABE>

ssh

User Exec Commands

Opens a Secure Shell (SSH) connection between two network devices

Supported in the following platforms:

• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,

Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade

Mobility 1240 Access Point

<IP/HOSTNAME> Specify the destination IP address or hostname. When entered without any parameters, this command

prompts for an IP address or a hostname.

count <1-10000> Optional. Sets the pings to the specified destination

• <1-10000> – Specify a value from 1 - 10000. The default is 5.

dont-fragment

{count|size}

Optional. Sets the don’t fragment bit in the ping packet. Packets with the dont-fragment bit specified are not

fragmented. When a packet, with the dont-fragment bit specified, exceeds the specified maximum

transmission unit (MTU) value, an error message is sent from the device trying to fragment it.

• count <1-10000> – Optional. Sets the pings to the specified destination from 1 - 10000. The default is 5.

• size – <1-64000> – Optional. Sets the size of ping payload size from 1 - 64000 bytes. The default is 100

bytes.

size <1-64000> Optional. Sets the ping payload size in bytes

• <1-64000> – Specify the ping payload size from 1 - 64000. The default is 100 bytes.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 134 135

Kommentare zu diesen Handbüchern

Keine Kommentare

Brocade Mobility RFS Controller CLI Reference Guide (Suppo Bedienungsanleitung Seite 78

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Brocade Mobility RFS Controller CLI Reference Guide (Suppo