Brocade Mobility RFS7000-GR Controller CLI Reference Guide Bedienungsanleitung Seite 406
- Seite / 607
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
392 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
MAC Extended ACL Config Commands
16
mark
MAC Extended ACL Config Commands
Use this command to specify a packet to mark.
NOTE
Use a decimal value representation of ethertypes to implement permit/deny/mark designations
for a packet. The command set for an Extended MAC ACL provides hexadecimal values for each of
its listed ethertypes. The switch supports all ethertypes. Use the decimal equvilant of the ethertype
listed in the CLI or for any other type of ethertype.
Syntax
{mark {dot1p <0-7>|dscp <0-63>|tos <0-255>}}
{any|host |XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX }
{any|host |XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX} [vlan vlan-id] [dot1p
dot1p-value] [type value|ip|ipv6|arp|vlan| wisp|0-65535] [log] [rule-precedence
access-list-entry precedence]
Parameters
Usage Guidelines
Use the mark option to specify the type of service (tos) and priority value. The tos value is marked in
the IP header and the 802.1p priority value is marked in the dot1q frame.
Whenever the interface receives the packet, its content is checked against all the ACE’s in the ACL.
It is marked based on the ACL configuration.
8021p
<0-7>
Modifies the 802.1p VLAN user priority.
tos
<0-255>
Modifies the TOS bits in an IP header.
XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX
Bit mask specifying the bits to match. The source wildcard can be any
one of the following:
• xx:xx:xx:xx:xx:xx/xx:xx:xx:xx:xx:xx–Source MAC
address and mask.
• any – Any source host.
• host – Exact source MAC address to match.
XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX
Bit mask specifying the bits to match. The destination wildcard can be
any one of the following:
• xx:xx:xx:xx:xx:xx/xx:xx:xx:xx:xx:xx–Destination MAC
address and mask.
• any – Any destination host.
• host – Exact destination MAC address to match.
dot1p
<0-7>
VLAN 802.1p priority value to match.
rule-precedence
<1-5000>
Access-list entry precedence.
type(8021q|
<1-65535>
|aarp|arp|ip|ip
v6ipvx||rarp|wisp)
Ethertype value represented as integer or keywords for well-known
ethertypes like IP, IPv6, ARP etc.
- Brocade Mobility 1
- RFS7000-GR Controller 1
- 3 User Exec Commands 107 4
- 8 Crypto-peer Instance 261 6
- 9 Crypto-ipsec Instance 271 6
- 10 Crypto-map Instance 281 6
- 12 Interface Instance 311 6
- 19 RADIUS Server Instance 449 9
- 20 Wireless Instance 483 9
- 21 RTLS Instance 559 10
- 22 SOLE Instance 579 10
- About This Document 11
- Annotated Symbols 12
- Notational Conventions 13
- 1Introduction 15
- Name Assumption 16
- CLI Overview 24
- Command Description 26
- Deleting Entries 30
- Command Output Pagination 30
- Controlling Capitalization 31
- 2Common Commands 33
- RFS7000#clrscr 34
- RFS7000(config)#exit 35
- Common commands 39
- Example (Others) 39
- Syntax (User Exec) 40
- Syntax (Priv Exec) 44
- Parameters(Global Config) 47
- IP routing status 68
- Secured Shell (SSH) server 68
- RFS7000(config)#show licenses 72
- 000 msec, dispersion 0.00 80
- RFS7000>show privilege 82
- 53-1001945-01 100
- Common to all modes 102
- Parameters 102
- <1300-1999> 103
- <2000-2699> 103
- <1-99> 103
- <100-199> 103
- Privilege / Global Config 110
- 3User Exec Commands 121
- RFS7000>enable 126
- [IP address 129
- User Exec Commands 132
- 4Privileged Exec Commands 137
- Priv Exec Command 138
- Priv Exec Command Summary 138
- Which files are tared? 140
- Untar fails..? 140
- RFS7000#show clock 146
- Sep 08 15:10:31 UTC 2006 146
- • flash:/path/file 149
- • nvram:startup-config 149
- • system:running-config 149
- RFS7000#disable 153
- RFS7000> 153
- RFS7000#mkdir TestDIR 160
- RFS7000# 160
- Directory name 160
- RFS7000#quit 165
- RFS7000 version 4.1.0.0-040GR 165
- RFS7000 login: 165
- RFS7000#reload 166
- Usage Guidelines 177
- Global Configuration Commands 184
- Eldorado(config)# 203
- Usage Guidelines 1 207
- Primary terminal line 211
- RFS7000(config)# 212
- (extended <name>) 216
- • 0 – Disables aging 217
- <1-1024> 227
- RFS7000(config)#wireless 247
- RFS7000(config-wireless)# 247
- <1-256>[] 248
- 6Crypto-isakmp Instance 251
- Diffie-Hellman group 2 257
- Diffie-Hellman group 5 257
- <seconds> 260
- 7Crypto-group Instance 265
- RFS7000(config-crypto-group)# 266
- <IP Address> 267
- Crypto Group Config Commands 273
- <A.B.C.D> 274
- 8Crypto-peer Instance 275
- RFS7000(config-crypto-peer) 276
- RFS7000(config-crypto-peer)# 280
- 9Crypto-ipsec Instance 285
- RFS7000(config-crypto-ipsec) 286
- RFS7000(config-crypto-ipsec)# 290
- Transpor t mode 290
- Tunnel mode 290
- Crypto IPSec Config Commands 294
- 10Crypto-map Instance 295
- RFS7000(config-crypto-map) 296
- (address) <list name> 300
- RFS7000(config-crypto-map)# 301
- Negates match values 301
- Crypto Map Config Commands 308
- 11Crypto-trustpoint Instance 309
- RFS7000(config-trustpoint)# 310
- Trustpoint Config commands 323
- RFS7000(config-if)#clrscr 326
- RFS7000(config-if)# 326
- Interface Config commands 333
- Sets MAC access groups ACL 334
- RFS7000(config-if)#management 335
- <512-1500> 336
- (config-if) 339
- RFS7000(config-if)#shutdown 342
- <1-4094> 347
- <1-4094 347
- <1-255> 349
- 13Spanning tree-mst Instance 351
- RFS7000(config-mst)#clrscr 352
- RFS7000(config-mst)# 352
- MST region name 357
- 14Extended ACL Instance 365
- RFS7000(config-ext-nacl)# 366
- Extended ACL Config Commands 367
- RFS7000(config-ext-nacl)#exit 372
- 15Standard ACL Instance 387
- RFS7000(config-std-nacl)# 388
- A.B.C.D/M 389
- RFS7000(config-std-nacl)#end 390
- RFS7000(config-std-nacl)#exit 391
- Standard ACL Config Commands 398
- 16Extended MAC ACL Instance 399
- RFS7000(config-ext-macl)# 400
- <0-7> 401
- <1-5000> 401
- <1-4095> 401
- • 802.1q 402
- (config-if) instance 411
- TABLE 13 DHCP config commands 416
- IP Address) 421
- RFS7000(config-dhcpclass)# 422
- <ascii stringWORD> 425
- \\0 at beginning. A single 425
- \ in the input is ignored 425
- RFS7000(config-dhcp)# 426
- RFS7000(config-dhcp)#clrscr 427
- [XX-XX-XX-XX-XX-XX 434
- XX:XX:XX:XX:XX:XX] 434
- 437
- <IP address> 438
- • b-node – Broadcast node 439
- • h-node – Hybrid node 439
- • m-node – Mixed node 439
- • p-node – Peer-to-peer node 439
- [A.B.C.D 440
- (config-dhcp) 444
- RFS7000(config-dhcpclass)#end 453
- Undo DHCP Server options 457
- WID, using (config)# mode 458
- (user classname) 458
- RFS7000(config-radsrv)#clrscr 466
- RFS7000(config-radsrv)# 466
- Enables a CRL check 467
- Command Description Ref 470
- RFS7000(config-radsrv-group)# 471
- (config-radsrv)) 473
- RADIUS group name 474
- Example–Creating a Group 484
- RADIUS Configuration Commands 485
- (0 492
- Trustpoint configuration 493
- (config-radsrv) 494
- 20Wireless Instance 497
- <1-65535> 502
- IP address 508
- Lists the channels 509
- Load balance by user account 524
- TestString zone 1 526
- <0-20> 534
- wired-to-wireless 537
- <0-30> 542
- – Multicast MAC address 543
- <1-256> 550
- RFS7000(config-wireless)#show 555
- <100-5000> 561
- <1-10> 561
- [<1-4094> 568
- <AA-BB-CC-DD-EE-FF> 574
- RFSwitch(config-rtls)#clrscr 577
- RFSwitch(config-rtls)# 577
- RFSwitch# 578
- RFSwitch(config)# 579
- <MACAA-BB-CC-DD-EE-FF> 581
- RFID tag filter 582
- RTLS Config Commands 583
- RFSwitch(config-rtls)#sole 590
- RFSwitch(config-rtls-sole)# 590
- <-90.00 - 90.00> 591
- SOLE Config Commands 594
- RFS7000 (config)# 597
Verwandte Produkte und Handbücher für Computerzubehör Brocade Mobility RFS7000-GR Controller CLI Reference Guide
Computerzubehör Brocade Mobility 5181 Access Point Product Reference Guide Bedienungsanleitung
(428 Seiten)
(428 Seiten)
Computerzubehör Brocade Mobility 1240 Access Point Installation Guide Bedienungsanleitung
(68 Seiten)
(68 Seiten)
Computerzubehör Brocade Mobility 7131N-FGR Access Point Product Reference Bedienungsanleitung
(593 Seiten)
(593 Seiten)
Computerzubehör Brocade Mobility 7131 Access Point Product Reference Guide Bedienungsanleitung
(520 Seiten)
(520 Seiten)
Computerzubehör Brocade Mobility 1220 Access Point Installation Guide Bedienungsanleitung
(63 Seiten)
(63 Seiten)
Computerzubehör Brocade Mobility Access Point System Reference Guide (Supp Bedienungsanleitung
(854 Seiten)
(854 Seiten)
Computerzubehör Brocade Enterprise Wireless LAN Antenna Specification Guid Bedienungsanleitung
(158 Seiten)
(158 Seiten)
Computerzubehör Brocade Virtual ADX Switch and Router Guide (Supporting AD Bedienungsanleitung
(374 Seiten)
(374 Seiten)
Computerzubehör Brocade Virtual ADX Security Guide (Supporting ADX v03.1.0 Bedienungsanleitung
(180 Seiten)
(180 Seiten)
Computerzubehör Brocade Virtual ADX OpenScript Programmer’s Guide (Support Bedienungsanleitung
(30 Seiten)
(30 Seiten)
Computerzubehör Brocade Virtual ADX OpenScript API Guide (Supporting ADX v Bedienungsanleitung
(132 Seiten)
(132 Seiten)
Computerzubehör Brocade Virtual ADX Server Load Balancing Guide (Supportin Bedienungsanleitung
(408 Seiten)
(408 Seiten)
Computerzubehör Brocade Virtual ADX XML API Programmer’s Guide (Supporting Bedienungsanleitung
(878 Seiten)
(878 Seiten)
Computerzubehör Brocade Virtual ADX Licensing Guide (Supporting ADX v03.1. Bedienungsanleitung
(20 Seiten)
(20 Seiten)
Computerzubehör Brocade Virtual ADX Installation and Deployment Guide (Sup Bedienungsanleitung
(78 Seiten)
(78 Seiten)
Computerzubehör Brocade Virtual ADX Global Server Load Balancing Guide (Su Bedienungsanleitung
(198 Seiten)
(198 Seiten)
Computerzubehör Brocade Virtual Connect Enterprise Manager Server Guide (S Bedienungsanleitung
(1 Seiten)
(1 Seiten)
Computerzubehör Brocade Virtual ADX Administration Guide (Supporting ADX v Bedienungsanleitung
(142 Seiten)
(142 Seiten)
Zanussi ZIT649BV Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Öfen Zanussi ZIT649BV.
Wir stellen 1 PDF-Handbücher Zanussi ZIT649BV zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Kommentare zu diesen Handbüchern