Brocade Multi-Service IronWare Routing Configuration Guide Bedienungsanleitung PDF herunterladen (Seite 764)

100

101

736 Multi-Service IronWare Routing Configuration Guide

53-1003033-02

Displaying IPv6 IS-IS information

TABLE 155 IPv6 IS-IS interface information

This field... Displays...

Total number of IS-IS interfaces The number of interfaces on which IPv6 IS-IS is enabled.

Interface The port or virtual interface number to which the information listed below

applies.

Local Circuit Number The ID that the instance of IPv6 IS-IS running on the interface applied to the

circuit between this interface and the interface at the other end of the link.

Circuit Type The type of IS-IS circuit running on the interface. The circuit type can be one of

the following:

• BCAST– broadcast

• PTP – point-to-point

Circuit Mode The IS-IS type in use on the circuit. The mode can be one of the following:

• LEVEL-1

• LEVEL-2

• LEVEL-1-2

Circuit State The state of the circuit, which can be one of the following:

• DOWN

• UP

Passive State The state of the passive option, which determines whether the interface is

allowed to form an IS-IS adjacency with the IS at the other end of the circuit.

The state can be one of the following:

• FALSE – The passive option is disabled. The interface can form an

adjacency with the IS at the other end of the link.

• TRUE – The passive option is enabled. The interface cannot form an

adjacency, but can still advertise itself into the area.

MTU The maximum length supported for IS-IS PDUs sent on this interface.

Level-1 Metric The default-metric value that the device inserts in IS-IS Level-1 PDUs originated

on this interface.

Level-1 Priority The priority of this IS to be elected as the Designated IS for Level-1 in this

broadcast network.

Level-1 Hello Interval The number of seconds the software waits between sending Level-1 hello

PDUs to the IS at the other end of the circuit.

Level-1 Hello Multiplier The number by which the software multiplies the hello interval to calculate the

hold time for Level-1 Hello messages received on the circuit.

Level-1 Designated IS The NET of the Level-1 Designated IS.

Level-1 DIS Changes The number of times the NET of the Level-1 Designated IS has changed.

Level-2 Metric The default-metric value that the device inserts in IS-IS Level-2 PDUs originated

on this interface.

Level-2 Priority The priority of this IS to be elected as the Designated IS for Level-2 in this

broadcast network.

Level-2 Hello Interval The number of seconds the software waits between sending Level-2 Hello

messages to the IS at the other end of the circuit.

Level-2 Hello Multiplier The number by which the software multiplies the hello interval to calculate the

hold time for Level-2 LSPs received on the circuit.

Level-2 Designated IS The NET of the Level-2 Designated IS.

Level-2 DIS Changes The number of times the NET of the Level-2 Designated IS has changed.

1 2 ... 759 760 761 762 763 764 765 766 767 768 769 ... 845 846

Kommentare zu diesen Handbüchern

Keine Kommentare

Brocade Multi-Service IronWare Routing Configuration Guide Bedienungsanleitung Seite 764

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Brocade Multi-Service IronWare Routing Configuration Guide