Brocade Multi-Service IronWare Routing Configuration Guide Bedienungsanleitung PDF herunterladen (Seite 829)

100

101

Multi-Service IronWare Routing Configuration Guide 801

53-1003033-02

Displaying VRRP and VRRP-E information for IPv4

Syntax: show ip vrrp-extended [brief | ethernet slot/portnum | statistics | ve num | vrid id]

The brief parameter displays the summary information. If you do not use this parameter, detailed

information is displayed instead. Refer to “Displaying detailed information” on page 802.

The ethernet slot/portnum parameter specifies an Ethernet port. If you use this parameter, the

command displays IPv4 VRRP or VRRP-E information only for the specified port.

The ve num parameter specifies a virtual interface. If you use this parameter, the command

displays IPv4 VRRP or VRRP-E information only for the specified virtual interface.

The vrid id parameter specifies a virtual router ID. If you use this parameter, the command displays

IPv4 VRRP or VRRP-E information only for the specified virtual router.

The statistics parameter displays statistics. Refer to “Displaying statistics” on page 805.

This display shows the following information.

TABLE 171 CLI display of VRRP or VRRP-E summary information

This field... Displays...

Total number of VRRP (or

VRRP-Extended) routers defined

The total number of virtual routers configured on this Brocade device.

NOTE: The total applies only to the protocol the Brocade device is

running. For example, if the Brocade device is running VRRP-E,

the total applies only to VRRP-E routers.

Interface The interface on which VRRP or VRRP-E is configured. If VRRP or VRRP-E

is configured on multiple interfaces, information for each interface is

listed separately.

VRID The ID of the virtual router configured on this interface. If multiple virtual

routers are configured on the interface, information for each virtual

router is listed in a separate row.

Current Priority The current VRRP or VRRP-E priority of this Brocade device for the virtual

router.

Flags Whether the backup preempt mode is enabled. If the backup preempt

mode is enabled, this field contains a “P”. If the mode is disabled, this

field is blank.

P:Preempt 2:V2 3:V3

2: implies VRRP Version2

3: implies VRRP Version3.

Short-Path-Fwd Displays information about whether VRRP-E Extension for Server

Virtualization is enabled or disabled.

State This Brocade device’s VRRP or VRRP-E state for the virtual router. The

state can be one of the following:

• Init – The virtual router is not enabled (activated). If the state

remains Init after you activate the virtual router, make sure that the

virtual router is also configured on the other routers and that the

routers can communicate with each other.

NOTE: If the state is Init and the mode is incomplete, make sure you

have specified the IP address for the virtual router.

• Backup – This Brocade device is a Backup for the virtual router.

• Master – This Brocade device is the Master for the virtual router.

Master addr The IP address of the router interface that is currently the Master for the

virtual router.

1 2 ... 824 825 826 827 828 829 830 831 832 833 834 ... 845 846

Kommentare zu diesen Handbüchern

Keine Kommentare

Brocade Multi-Service IronWare Routing Configuration Guide Bedienungsanleitung Seite 829

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Brocade Multi-Service IronWare Routing Configuration Guide