Brocade Network OS Command Reference v4.1.0 Bedienungsanleitung PDF herunterladen (Seite 122)

84 Network OS Command Reference

53-1003115-01

class-map

Enters class-map configuration mode.

Synopsis class-map class-map-name

no class-map class-map-name

Operands class-map-name Name of classification map. The map name is restricted to 64 characters.

Defaults The class-name “class-default” is reserved and cannot be created by users.

Command Modes Global configuration mode

Description Use this command to enter class-map configuration mode.

Usage Guidelines Enter no map class-map name while in global configuration mode to remove the classification

map.

Only 128 class maps are allowed.

NOTE

This command is only supported on Brocade VDX 8770-4, VDX 8770-8, and later switches.

Examples To create a classification map and place system into config-classmap mode:

switch(config)# class-map default

switch(config-classmap)#

NOTE

The class map created using class map becomes the default class-map and cannot be removed

using the no class-map command. You can remove a class-map from a policy map however.

See Also show running-config class-map, match interface police-priority-map, policy-map, qos cos,

service-policy

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 140 141

Keine Kommentare

Brocade Network OS Command Reference v4.1.0 Bedienungsanleitung Seite 122