Brocade Network OS Command Reference v4.1.0 Bedienungsanleitung PDF herunterladen (Seite 98)

60 Network OS Command Reference

53-1003115-01

cbs

Mandatory command for configuring the controlled burst size for a class-map.

Synopsis cbs cbs-size

no cbs cbs-size

Operands cbs-size Controlled burst size. Valid values range from 1250 through 5000000000

bytes in increments of 1 byte. This is a mandatory parameter for

configuring a class-map.

Defaults None

Command Modes Policymap class police configuration mode

Description This command sets the controlled burst size for a class-map.

Usage Guidelines Only the police cir and cbs commands are mandatory for configuring a class-map.

If the optional parameters for a class-map are not set, they are treated as disabled. To delete

parameters for a class-map, you must delete all policer parameters while in the policy-map class

configuration mode using the no police cir command.

This command is only supported on Brocade VDX 8770-4, VDX 8770-8, and later switches.

Use the no version of this command to remove the parameter from the class-map.

Examples This example configures a class-map called “default” within a policy-map.

switch# configure terminal

switch(config)# policy-map policymap1

switch(config-policymap)# class default

switch (config-policymap-class)# police cir 40000

switch(config-policymap-class-police)# cbs 50000

See Also conform-set-dscp, conform-set-prec, conform-set-tc, ebs, eir, exceed-set-dscp, exceed-set-prec,

exceed-set-tc, police cir, police-priority-map, policy-map, qos cos, service-policy, set-priority

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 140 141

Keine Kommentare

Brocade Network OS Command Reference v4.1.0 Bedienungsanleitung Seite 98