Brocade Mobility Access Point System Reference Guide (Supp Bedienungsanleitung Seite 295

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 854
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 294
Brocade Mobility Access Point System Reference Guide 285
53-1003100-01
5
FIGURE 145 Profile Interface - PPPoE screen
26. Use the Basic Settings field to enable PPPoE and define a PPPoE client:
Enable PPPoE
Select Enable to support a high speed client mode point-to-point connection using the PPPoE
protocol. The default setting is disabled.
Service
Enter the 128 character maximum PPPoE client service name provided by the service provider.
DSL Modem Network
(VLAN)
Use the spinner control to set the PPPoE VLAN (client local network) connected to the DSL modem.
This is the local network connected to DSL modem. The available range is 1 - 4,094. The default
VLAN is VLAN1
Client IP Address
Provide the numerical (non hostname) IP address of the PPPoE client.
Seitenansicht 294
1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 853 854

Kommentare zu diesen Handbüchern

Keine Kommentare