Brocade Network OS NETCONF Operations Guide v4.1.1 Bedienungsanleitung PDF herunterladen (Seite 321)

100

101

Network OS NETCONF Operations Guide 289

53-1003231-02

Configuring protocol-based VLAN classifier rules

<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

operation="delete"/>

<trunk>

<vlan>

</vlan>

</allowed>

</mode>

</switchport>

</tengigabitethernet>

</interface>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="1914" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

Configuring protocol-based VLAN classifier rules

You can configure VLAN classifier rules to define specific rules for classifying frames to selected

VLANs based on protocol and MAC addresses. Sets of rules can be grouped into VLAN classifier

groups (refer to “Creating a VLAN classifier group and adding rules” on page 291).

VLAN classifier rules (1 through 256) are a set of configurable rules that reside in one of these

categories:

• 802.1Q protocol-based classifier rules

• Source MAC address-based classifier rules

• Encapsulated Ethernet classifier rules

NOTE

Multiple VLAN classifier rules can be applied per interface provided the resulting VLAN IDs are

unique for the different rules.

802.1Q protocol-based VLANs apply only to untagged frames, or frames with priority tagging.

With both Ethernet-II and 802.2 SNAP encapsulated frames, the following protocol types are supported:

• Ethernet hexadecimal (0x0000 through 0xffff)

• Address Resolution Protocol (ARP)

• Fibre Channel over Ethernet (FCoE)

• FCoE Initialization Protocol (FIP)

• IP version 6 (IPv6)

1 2 ... 316 317 318 319 320 321 322 323 324 325 326 ... 621 622

Kommentare zu diesen Handbüchern

Keine Kommentare

Brocade Network OS NETCONF Operations Guide v4.1.1 Bedienungsanleitung Seite 321

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Brocade Network OS NETCONF Operations Guide v4.1.1