Brocade Network OS NETCONF Operations Guide v4.1.1 Bedienungsanleitung PDF herunterladen (Seite 364)

100

101

332 Network OS NETCONF Operations Guide

53-1003231-02

Configuring RSTP

</portfast>

</spanning-tree>

</tengigabitethernet>

<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

operation="delete"/>

<spanning-tree>

</portfast>

</spanning-tree>

</tengigabitethernet>

<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

operation="delete"/>

<spanning-tree>

</spanning-tree>

</tengigabitethernet>

</interface>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="2000" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

When the spanning tree topology is completed, the network switches send and receive data only on

the ports that are part of the spanning tree. Data received on ports that are not part of the

spanning tree is blocked.

NOTE

Brocade recommends leaving other STP variables at their default values.

For more information on STP, refer to “Spanning tree configuration and management” on

page 338.

Configuring RSTP

The basic process for configuring RSTP is as follows.

1. Issue the <edit-config> RPC to configure the <protocol> node in the

urn:brocade.com:mgmt:brocade-interface namespace.

2. Under the <protocol> node, include the <spanning-tree> node from the

urn:brocade.com:mgmt:brocade-xstp namespace.

3. Under the <spanning-tree> node, include the <rstp> node element.

Refer to “Enabling STP, RSTP, MSTP, PVST, or Rapid PVST” on page 338 for details.

4. Under the <rstp> node, designate the root switch using the <bridge-priority> leaf node.

1 2 ... 359 360 361 362 363 364 365 366 367 368 369 ... 621 622

Kommentare zu diesen Handbüchern

Keine Kommentare

Brocade Network OS NETCONF Operations Guide v4.1.1 Bedienungsanleitung Seite 364

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Brocade Network OS NETCONF Operations Guide v4.1.1